|In your basket: 0 pcs in total 0 €|
This product can be made to measure after your measurements. To submit us your measurements, please use the following measurement chart.
Please measure your head circumference over the forehead. To prevent the helmet to be too tight, the inner circumference of the helmet bowl is approx. 1 inch (3cm) larger. For that reason, please give us an exact data without adding any space. If you are wearing a quilted arming cap or a chain mail coif under the helmet, please take the measure including this outfit on.
The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.