Chainmail Hauberk - Alternating Dome Riveted Flat Rings

1x

Mild Steel, Flat Ring, Round riveted (Alt), 9mm, 17gauge | This chainmail hauberk is crafted from dome riveted flat rings which alternate with solid flat rings. The individual rings of mild steel measure 9mm in diameter and 17 gauge in thickness. This method of alternating riveted mail with solid rings punched from sheets of steel was a historical method used in much mail construction. It saved a great deal of time by circumventing the need to rivet half the rings. More information...

€348,00
€348,00 excl. VAT
add to cart
First, select a variant
In stock 14 pcs
Item physically stored in our Warehouse in Kadan
, dispatch on 29-Mar-2024

These variants are in stock

Size: M
4 pcs
4 pcs
Size: L
1 pcs
1 pcs
Size: XL
4 pcs
4 pcs
Size: XXL
5 pcs
5 pcs
Item number: 10452

Chainmail Hauberk - Alternating Dome Riveted Flat Rings

Construction: Alternating Dome Riveted Flat Rings with Solid Flat Rings

Ring Type: Flat Ring

Ring Size: 9mm

17 gauge = ring thickness 1,15mm

Finish: Natural

The measurements below are taken when the item is stretched in the measured direction. The sizes vary slightly - so the measurements stated below are to be understood as approximations.

Size M L XL
Chest circumference incl clothing 94-109cm 110-125cm 126-140cm
Length from shoulder 86cm 91cm 96cm
Weight 9 840 g 10 970 g 12 820 g

Size XXL

  • Total length approx. 99cm
  • Length of the slit 26cm
  • Length of the sleeve along the inside edge approx. 69cm
  • Chest width measured from armpit to armpit about 80cm
  • Width over the belly 80cm
  • Weight approx. 15.9 kg

A high-quality product made by Lord Of Battles®

6-Dec 2021
Adrien Ducept
verified review
I like this hauberk very much, it is very solid, the mesh is dense and gives a really nice look, it has even a bit of tailoring as there is a reduction of the sleeves, and it came well oiled, i use a thick gambeson underneath for fights. The downs are that some rivets are lose, and tend to fall down when hit, but the rings stay well in place, and that the rings for reduction of the sleeves are hanging and therefore tend to catch other rings while fighting. I recommend to configure thes hanging rings by putting them in 6 in 1 and not 4 in 1, that's what I did, and now it's good, I might do a bit tailoring under the sleeves and the elbows. To sum it up, a very nice and sturdy hauberk for this range of price!

Similar products (20)

Recommended accessories (1)