Čeština
Deutsch
Universal Nano Impregnation Spray
Do you know that feeling when a cloudburst surprises you at a historical battle, a hike, or a hunt, and your gear starts getting relentlessly heavy with water? With this top-tier impregnation using the latest developments in nanotechnology, you can say goodbye to rain and dirt. The spray creates an extreme water-repellent layer on both natural and synthetic fibres without compromising their breathability in any way. The protection is so perfect that even aggressive liquids like coffee, tea, red wine, or cola turn into pearls on the surface of your clothing and simply roll off. Keep your valuable gear, whether it's a tent, a cloak, or a modern jacket, dry and clean. Further product information ...
Universal Nano Impregnation Spray for Textile and Leather – Invisible Water Shield
Nanotechnology Serving History and Modernity
This product works on the principle of creating an invisible protective mesh of miniature particles. As a result, the treated material is protected not only against moisture but also against UV radiation and temperature fluctuations. A major advantage is the preservation of the material's "breathing" ability. You can therefore use it without worry on your historical wool costumes, cotton canvases, tents, awnings, but also on modern outdoor equipment equipped with climate membranes such as Gore-Tex®, Sympa-Tex®, and others. The impregnation is also suitable for suede (nubuck, velour), backpacks, and footwear.
Instructions for Use and Maintenance
For the impregnation to work one hundred per cent, the correct procedure must be followed. The surface you wish to treat must be thoroughly cleaned of dust and dirt beforehand. Always perform the application outdoors or in a thoroughly well-ventilated room (open window). Apply the spray from a distance of approx. 20 to 25 cm (approx. 8 to 10 inches), either vertically or horizontally. I recommend treating areas exposed to the greatest water stress (e.g., tent seams or jacket shoulders) multiple times. After spraying, let the gear dry at room temperature for approximately 45 minutes. If the treated surface gets dirty, dry dirt will fall off on its own, and wet dirt will not soak in – simply wipe it off with a damp cloth.
Technical Specifications
| Volume | 200 ml (approx. 6.76 fl oz) |
| Technology | Nanotechnology |
| Application Distance | 20 - 25 cm (approx. 8 - 10 inches) |
| Drying Time | approx. 45 minutes |
| Suitable Materials | Textile (natural and synthetic), Leather (Nubuck, Velour), Membranes (Gore-Tex etc.) |
| Protection Against | Water, dirt, UV radiation |
Safety Warnings
Exercise extreme caution when handling. The impregnation is extremely flammable and dangerous for the environment. Fumes may be hazardous to health, so apply exclusively in fresh air. Due to the nature of the pressure container and its contents, this product cannot be transported by air freight.
I recommend keeping this spray in stock at all times, especially before the season starts, so you can treat tents and outerwear in good time.
We are here for you!
