To the content  To the main menu


Gothic broadsword Rigobert de luxe, class B

Blunted version of this broadsword is battle-ready, i.e. for practical use at battles and reenactment.

More information

Out of stock. Delivery date 19-Jan at your place

248,00 €
204,96 € excl. VAT

Gothic broadsword Rigobert de luxe

Sword class B

  • Total length approx. 891 mm
  • Blade length approx. 721 mm
  • Length of the cross guard approx. 195 mm
  • Width of the blade at the guard approx. 74 mm
  • Thickness of the blade at the Guard approx. 5 mm
  • Width of the blade 100 mm from the blade tip approx. 24 mm
  • Thickness of the blade 100 mm from the blade tip approx. 3 mm
  • The point of balance (POB) is located approx. 6 cm from the cross guard (sharp version) and approx. 10 cm (blunt version)
  • Weight approx. 1660 g (sharp version)
  • Blade from spring steel DIN 54SiCr6, oil quenched at approx. 53 HRC
  • Each sword is individually manufactured. That is why the above specifications can vary slightly from weapon to weapon.

Made in the Czech Republic.

Specifications vary from piece to piece; all stated data are to be understood as approximate. The blade is made out of hardened and tempered high carbon spring steel that is not stainless. The guard and pommel is made of steel.

The practical | battle-ready version of this sword has a blunt edge (2-3 mm) and rounded point. Such sword was designed to be drawn in a battle or in a stage combat show.

Please note we cannot accept any responsibility for injury, damage or loss incurred by use of any of our sword. You use the sword entirely at your own risk! Even an unsharpened sword can cause serious injury and if precaution is not used easily break bone. Swords are not toys! Improper use and handling of accord may result in serious injuries or death to yourself or bystanders. Please keep your sword out of reach of children!

In fighting with sword on sword, the opponent’s blade should be parried with the side of the blade. Lead your sword sporty right and without excessive and/or unnecessary strength.

Compliance to local, state and federal laws and/or statutes is the responsibility of the purchaser. Despite the high conscientiousness in the production and material selection, we cannot provide any warranty for breakage of the blade even at proper use. Any sword blade can be broken under certain circumstances. An absolute warranty cannot be provided by any respectable maker.

We warranty our swords against all manufacturer's defects (workmanship and or materials) for a period of two years. This warranty applies only when the product is used under normal conditions for which the sword is designed, and does not apply to damage related to accident, misuse, improper care, negligence, and abnormal and/or excessive wear and tear.

Possible nicks in the blade edge are natural symptom of wear and tear and cannot be reclaimed. When they turn up, please remove all sharp nicks by use of diamond file, abrasive paper or grinding machine.

Loosening of a cross | guard cannot be in many cases avoided as well. It can be fixed by additional riveting or tightening the screw joint. Winding a fishing line around the blade tang into the gap between the grip and guard prove as helpful as well to many swordmen, when trying to fasten a loosened guard.

Please read our Directions for the use of bladed weapons

Included in these categories: Short swords and bowmen swords

Reviews (3)

Submit your review
  • 3

    Enttspricht den historischen Vorlagen, alle vom Schmied vorher angegebenen Angaben zum Schwert vollkommen korrekt. Großartige Arbeit.

  • 2
    Kruszewski Nicolas

    The blade is beautiful, impressive and very well done. It's an interesting model of one-handed sword, heavy and well balanced. (sharp blade version).

Comments (1)

Submit your comment
  • 1

    this sword is one of the best i ever wielded, the design and geometry of the blade make sure that its sturdy and estetic. iv'e abused one of these severely and yet it stood to any test i could throw at it, amazing craftsmenship 11/10.

Similar products (44)

Show all similar products

Articles (1)

  • Polámaný meč

    Instruction manual to practical bladed weapons


    These instructions describe the way to handle safely with cold weapons as well as the way to maintain them properly. Speaking about bladed weapons, we mean by this term stabbing and cutting weapons such as, for example, sword, rapier, dagger and hunting knife. Weapons are made of spring steel (CSN Standard No. 413180, 14260 and 15260.)

Last viewed products (1)

Last viewed products
  • Do you like shopping with free shipping? If you purchased for at least € 1200, you will receive a free delivery to France, Italy, Spain, Austria, Hungary and Poland!

    Free delivery on orders over 1200€

  • Is it necessary to deliver the goods quickly? If you manage to place your order of in-stock items by 11.00 am and pay, it will be despatched on the same day. Delivery time within Europe take about 2-5 business days.

    Fast delivery for orders by 11:00 AM

  • Does the delivered size not fit? Simply return the unsuitable size to us within 14 days (registered customers within 30 days) and immediately reorder the correct size. The price of the return will be refunded within a few days after receipt.

    Exchange of size within 14/30 days for free

  • Many of our products are not available anywhere else. These are unique replicas of museum exemplars, designs of ours or our customers.

    Unique items exclusive production

  • On an approx. 800m2 we store items worth about 800,000 EURO. Choose any item from stock today and it will be despatched immediately. Personal pickup in Kadan can be organized within a few minutes!

    Huge range of products Bestsellers always in stock

Choose a language

Choose a currency