|In your basket: 0 pcs in total 0 €|
Crinoline is a skirt-shaped structure of steel designed to support the skirts of a woman's dress into the required shape. The name crinoline was invented by one of the fabric's manufacturers, who combined the Latin words crinis (meaning "hair") and lin (meaning "flax").
Our model is derived from the so called cage crinoline and is made of light pure cotton (180 g / m2). The built-in tunnels contain hoops made of polyurethane. Three floors contain hoops of 2cm diameter and two supporting floors contain 1cm-hoops. Thanks to the slit and the band at the waist, you can be sure that our crinoline will fit you perfectly.
Warning: if you put on the crinoline, expect a long standing. You can sit down only with rolled-up skirt that is something unthinkable in public. Be also careful when going up the stairs before you get used to moving in the crinoline-supported skirt.
The Crinoline is usually made white, but can be also made in further colors according to these sample cards. Please note the requested color(s) into your order, in the field for your comment. Please specify always (1) the number of the sample card, (2) letter of the color, and (3) description of the colour (Example: 04-F-blue). If you choose a fabric with different composition, the price may change. Possible price change will be consulted with you before processing the order.
The Crinoline is available in standard sizes.
The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.