|In your basket: 0 pcs in total 0 €|
This airy shoes reach to approx. 1/3 of the shins. They are tied together with leather string through the flaps in the cut-out vamp. The flaps are stamped. The toe cap is sewn from two halves.
The vamp of these Gallic shoes is made of genuine, approx. 2mm thick cowhide. The leather is treated with palm oil, animal fat and beeswax for a long lifespan. The insole is made from 4mm thick rolled leather. The outsole is made of a special porous rubber. The outsole is equipped with a heel for your pleasant feeling while walking. These shoes are individually manufactured in the Czech Republic in traditional way. It is neither a mass production item, nor a cheap imported product from Asia.
These shoes are available in sizes after this chart. If you select the size "made-to-measure", they will be manufactured according to this measurement chart. Please fill it in after you finish your order.
Our footwear is made from genuine leather of three basic colours: black, dark brown and light brown (also described as tan color). Any other color has to be applied in form of special covering varnish that has one important drawback. Cracks of the varnished leather may appear after some time of use. The varnish on mechanically strained parts may even crumble away. Please consider this fact before placing your order, as we cannot provide guarantee for the varnish for two years as usually. If you intend to use such shoes or boots just only once (e.g. for a wedding) or only several times a year, we assure you the shoes will serve you well and give you joy.
The shoes are treated with balm containing beeswax. The shoes are made of genuine leather. You can treat them with various shoe care products. The balm softens the leather soft and waterproofs it. Moreover, it makes the leather darker. If you do not have the balm, you can also use oil for leather or a normal shoe polish. The shoes polish can easily tone the leather color and cover minor imperfections (e.g. scuffed shoe tips).
In the case of hand-forged blades, our blacksmith takes the already rolled spring steel and forges it by hand on the anvil or under the drop hammer. The steel gets more solid (denser) by forging. In the case of industrially rolled spring steel blades, the sheets of steel plate is cut to strips under drop snips, then ground or milled and immediately forged into the annealing furnace and oil-quenched. The properties of both kinds of steels are not very different, since industrial rolling is already very good! On forged blades are usually blacksmith marks, which give them an authentic and unique look.