Gothic dagger with patina Audric, one-sided grind
This dagger was used particularly in the 13th century on the territory of present Germany and Italy. Source: Petr Klučina, Zbroj a zbraně (ISBN: 8071856614)
- Blade from spring steel CSN 14260 (Din 54SiCr6 | GOST 60S2CHA)
- Hardness of the blade 52-54 HRC
- traditionally forged blade, hardened in oil bath
- Antique Iron Patina Finish
- 401 mm – Overall length
- 265 mm – Blade length
- 36 mm – Length of the cross-guard (widening at the grip)
- 268 g – Approx. weight of the dagger without the scabbard
- 104 g – Approx. weight of the leather scabbard
Specifications vary from piece to piece; all stated data are to be understood as approximate. The blade is made out of hardened and tempered high carbon spring steel that is not stainless. The guard and pommel is made of steel.
The practical | battle-ready version of this dagger has a blunt edge (2-3 mm) and rounded point. Such dagger was designed to be drawn in a battle or in a stage combat show.
Please note we cannot accept any responsibility for injury, damage or loss incurred by use of any of our dagger. You use it entirely at your own risk! Even an unsharpened blade can cause serious injury and if precaution is not used easily break bone. Daggers are not toys! Improper use and handling of accord may result in serious injuries or death to yourself or bystanders. Please keep your dagger out of reach of children!
Compliance to local, state and federal laws and/or statutes is the responsibility of the purchaser.
Despite the high conscientiousness in the production and material selection, we cannot provide any warranty for breakage of the blade even at proper use. Any blade can be broken under certain circumstances. An absolute warranty cannot be provided by any respectable maker.
We warranty our daggers against all manufacturer's defects (workmanship and or materials) for a period of two years. This warranty applies only when the product is used under normal conditions for which the sword is designed, and does not apply to damage related to accident, misuse, improper care, negligence, and abnormal and/or excessive wear and tear.
Possible nicks in the blade edge are natural symptom of wear and tear and cannot be reclaimed. When they turn up, please remove all sharp nicks by use of diamond file, abrasive paper or grinding machine.
Loosening of a cross | guard cannot be in many cases avoided as well. It can be fixed by additional riveting or tightening the screw joint. Winding a fishing line around the blade tang into the gap between the grip and guard prove as helpful as well to many reenactors, when trying to fasten a loosened guard.
Please read our Directions for the use of bladed weapons.
Included in these categories: Dirk daggers