Scottish Braveheart Two-Handed Sword

Decorative Braveheart Two-Handed Sword with Suede Grip

A Monumental William Wallace Film Sword

This decorative Braveheart sword is based upon the striking weapon associated with the film portrayal of the Scottish freedom fighter William Wallace. Its design is deliberately imposing, combining a long straight blade with an extended hilt, broad crossguard and substantial pommel.

At approximately 133 cm / 52.4 in long, the sword becomes a dominant feature within a collection. It is best presented upon a stable individual stand or a securely installed wall mounting system.

This is not an exact copy of the surviving sword attributed to the historical William Wallace. It is primarily a cinematically styled collector’s replica, blending elements of European great swords with a distinctive design created for a romantic interpretation of medieval Scotland.

Polished AISI 440 Stainless-Steel Blade

The straight double-edged blade is made from hardened AISI 440 stainless steel. Its highly polished surface reflects the light and emphasises the long proportions tapering gradually towards the point. At the crossguard, the blade is approximately 42 mm / 1.65 in wide and 5 mm / 0.20 in thick.

The edges are deliberately blunt, measuring approximately 1 mm / 0.04 in across. Nevertheless, the considerable mass and pointed tip mean that careless handling may still cause serious injury.

The blade continues into the hilt with a full-length tang. This construction adds structural continuity to the decorative sword, but must never be regarded as evidence that the weapon is suitable for fencing. The stainless-steel blade, assembly and cast hilt components are intended for display rather than receiving impacts or cutting targets.

Extended Ricasso Covered in Genuine Suede

One of the most distinctive features is the long unsharpened section of blade immediately above the crossguard. This extended ricasso, together with the principal handgrip, is covered in genuine dark-brown suede.

The matt, softly napped leather surface gives the sword a rugged cinematic character. The exposed blade measures approximately 87 cm / 34.3 in from the point to the beginning of the suede covering. The leather then continues visually across the guard area towards the pommel, unifying the complete upper section of the sword.

Do not clamp the suede tightly within a narrow metal display bracket. Prolonged sunlight, excessive humidity, water and grease from the hands may alter the colour or create polished patches upon the natural leather.

Broad Crossguard with Trefoil Terminals

The straight crossguard measures approximately 28.5 cm / 11.2 in. Its arms have a raised longitudinal profile and finish in rounded trefoil-shaped terminals. A short decorative projection extends towards the blade at the centre, whilst two downward-curving lugs frame the grip side.

The guard is cast from zamak, a zinc-based alloy, and finished to resemble brushed steel. Zamak permits regular sculpted details, but it is more brittle than forged steel. A forceful impact or fall may bend, crack or break the decorative components.

Sculpted Pommel with a Steel-Coloured Finish

The elongated grip ends in a large sculpted pommel with an irregular rounded surface and several recessed details. A circular feature at its end resembles a visible fastening nut. Like the crossguard, the pommel is made from zamak with a steel-coloured surface finish.

Its substantial shape completes the rugged film aesthetic and visually balances the long blade. It is not intended for pommel strikes, parrying or any other practical martial technique.

William Wallace in Historical Context

William Wallace became one of the leading figures of the First War of Scottish Independence. In 1297 he played a central part in the Scottish victory at Stirling Bridge and subsequently served as Guardian of Scotland. Following the defeat at Falkirk in 1298, he continued resisting the authority of the English king Edward I. Wallace was eventually captured and executed in London in 1305.

The surviving sword displayed at the National Wallace Monument in Stirling is considerably longer than this film replica, and its direct association with Wallace cannot be established with certainty. It was first recorded in writing in 1505, when it reportedly received a new hilt, pommel, scabbard and belt. Its present appearance therefore need not represent the form the weapon may have possessed during the Middle Ages.

Large European swords with extended grips were already used during the thirteenth and fourteenth centuries. However, the characteristically Scottish two-handed sword commonly called a claymore is associated primarily with the later fifteenth and sixteenth centuries. This product should therefore be understood as a cinematic interpretation of a medieval great sword, rather than an exact reconstruction of a weapon carried in 1297.

Displaying the Sword Safely

• Use a stable stand or wall rack rated for at least 3 kg / 6.6 lb.
• Position the supports so that they do not crush the suede or press against the decorative guard terminals.
• When lifting the sword, hold the grip with one hand and support the blunt blade with the other.
• Do not mount it above a bed, sofa, desk, doorway or any regularly occupied position.
• Select fixings appropriate to the wall material and inspect them regularly.
• Limit prolonged direct sunlight, which may fade or discolour the natural suede.

Technical Specifications

Caring for the Blade, Fittings and Suede

Wipe the polished blade regularly with a dry soft cloth. Although it is made from stainless steel, perspiration, dust and prolonged moisture may still mark the surface. A very light film of neutral weapon-care oil may be applied for storage. Remove all excess and do not allow oil to reach the suede.

Clean the crossguard and pommel with a soft dry cloth only. Do not use abrasive paste, wire wool or aggressive metal polish, as these may remove the surface finish and expose the underlying alloy.

Dusty suede may be brushed gently with a soft brush intended for nubuck or suede leather. Do not soak it, apply solvents or treat it with ordinary oil intended for smooth leather. Store the sword in a dry environment with a stable room temperature.

Safety Information

• This sword is intended exclusively as a decorative collector’s item.
• It is unsuitable for HEMA, stage combat, contact LARP, cutting or partner drills.
• Never strike another weapon, shield, timber or cutting target with the blade.
• The blunt edges and point may still cause severe injury because of the sword’s weight.
• Protect the cast zamak guard and pommel from impacts and falls.
• Maintain ample clearance whenever handling the sword and never swing it indoors.
• Keep the product beyond the reach of children and anyone unfamiliar with its weight.
• Inspect the hilt and display mounting before moving or remounting the sword.

Recommended Accessories

For secure presentation, we recommend a substantial wall rack for long swords, a horizontal display stand or a freestanding floor rack. A soft cotton cloth, suede brush and neutral conservation oil for metal will help maintain the materials.

For an impression inspired by Scotland in the late thirteenth or early fourteenth century, display the sword alongside a woollen tunic, hose, leather belt, padded garment and mail coif. Remember that both the film costumes and this sword offer a romanticised interpretation of history rather than an exact reconstruction of William Wallace’s personal equipment.