Čeština
Deutsch
Excalibur Boltcutter Replacement Blades – 18-Piece Bulk Set
In the world of crossbow hunting, precision and lethality are non-negotiable. If your Boltcutter broadheads have lost their edge, this 18-piece bulk set of replacement blades is the most cost-effective way to restore factory-new performance. With 18 blades in one pack, you have enough to fully refurbish six complete 3-blade broadheads. Crafted from high-quality stainless steel, these blades provide surgical sharpness and exceptional durability, ensuring that every arrow in your quiver is ready for a clean and ethical harvest. Designed as a perfect fit for the entire Boltcutter range—including 100gr, 125gr, and 150gr versions—these blades feature aerodynamic vents. These cut-outs reduce wind resistance, preventing the arrow from "planing" and ensuring your bolts fly true even at the blistering speeds of modern Excalibur crossbows. Don't gamble with dull equipment; fresh blades mean deeper penetration and better blood trails. Having 18 replacement blades on hand means you’re prepared for a full season of hunting or intense broadhead tuning sessions. Further product information ...
Would you like to be notified as soon as the item is in stock?
You will receive a short e-mail as soon as we have it back in stock.
Excalibur Boltcutter Replacement Blades – 18-Piece Bulk Set
How to Install and Use Replacement Blades
Replacing the blades is a straightforward task that can be done in a minute. Carefully unscrew the broadhead tip, slide out the old blades, and insert the new ones into the slots of the ferrule. Make sure each blade is seated correctly before tightening the tip back down. Exercise extreme caution during this process, as these blades are razor-sharp right out of the box. After installation, perform a spin test to ensure the broadhead is perfectly aligned with the arrow shaft.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | Excalibur Crossbow |
| Pack Quantity | 18 Replacement Blades |
| Material | Premium Stainless Steel |
| Compatibility | Boltcutter 100gr, 125gr, 150gr |
| Blade Type | Vented (Aerodynamic design) |
Maintenance and Safety Warnings
Even though these blades are stainless steel, it is good practice to clean them after exposure to moisture or blood. A light coat of non-scented oil will protect the fine edge from micro-corrosion. What to avoid: Never fire these hunting blades into standard straw or foam targets. They will get stuck, dull immediately, and you will likely cut yourself or damage the blades while trying to extract them. For practice, always use field points of the same grain weight to maintain consistent accuracy.
Recommended Accessories
To handle these blades safely, we highly recommend using a broadhead wrench to prevent accidental slips while tightening. Keep your assembled hunting bolts in a crossbow quiver with a protective foam hood to keep the edges sharp during transport. If you need to test your broadhead flight, make sure to use a dedicated broadhead target specifically designed to stop and release sharpened blades without damaging the ferrule.
We are here for you!
.3773623034.1696456237.png.webp){kind=logo}
.3773623034.1696456268.png.webp)
.3773623034.1696456247.png.webp)