avin R191 String and Cable Set for R26, R26X, and R5X Crossbows

Authentic Ravin R191 String and Cable Set for R26, R26X, and R5X Crossbows

When to Replace Your Strings and Cables

Maintaining a high-velocity crossbow like the Ravin R26 requires proactive care. Ravin strictly recommends replacing your strings and cables every 2 years or every 400 shots, whichever comes first. Because the R26 series features such an aggressive cam rotation, the internal strands of the archery string undergo significant stress. By installing a new R191 kit, you reset your timing to factory standards and prevent cam lean, ensuring your crossbow remains the most accurate tool in your arsenal.

Technical Specifications (R191)

Professional Setup and Safety

Servicing the R26 series is a specialised process. You must use a Ravin Multi-Press for all string and cable changes. Standard bow presses are not designed for the extreme limb curvature of these models and could cause the limbs to slip or fracture. Before fitting the new set, ensure your cams are free from debris. Once installed, double-check the timing marks on the cams to ensure a perfectly balanced draw and release.

Technical Insight

The R26 and R5X models are among the most compact crossbows ever created. To achieve this, the cables and strings must withstand higher tension-per-inch than almost any other archery product. The R191 set features a proprietary fibre blend that is pre-stretched at the factory to eliminate "creep," ensuring your sight-in remains consistent even after hundreds of shots.

Maintenance and Warning Signs

• Regular Waxing: Apply premium string wax to the non-served areas of the string to prevent drying and fraying.
• Keep it Clean: Ensure the rail and the string's centre serving are free from grit, which can act as an abrasive.
• Visual Inspection: Check the orange loop ends before every session for any signs of strand separation or wear.
• Warning: Never dry-fire your crossbow. A dry fire on an R26 will likely snap the string and cables instantly, potentially causing injury or severe damage to the cams.

Recommended Accessories

For a successful replacement, the Ravin Multi-Press is an absolute requirement. We also recommend using Ravin String Fluid for deep-fibre lubrication and Ravin Rail Lube to reduce friction. After installing your new set, always use Genuine Ravin Bolts to ensure the nock fit is perfectly matched to the new centre serving, preventing premature wear.