Čeština
Deutsch
Insert for Easton aluminum arrow - Outlet
Are you looking for a way to increase the versatility of your archery equipment? This aluminium insert is a key component for every demanding archer who requires precision and flexibility. Designed specifically for arrow shafts marked 13136, it features an integrated internal thread that allows you to swap points instantly without the need for re-gluing. Whether you are preparing for target practice with a field point or need to equip your arrow with a broadhead for specific purposes, this insert provides a stable and concentric connection essential for an accurate shot. The lightweight yet durable high-grade aluminium construction has a minimal impact on the arrow's front-of-center (FOC), helping you maintain an optimal flight path. Further product information ...
Aluminium Arrow Insert for 13136 Shafts – Screw-in System
Technical Specifications and Features
The insert acts as the crucial link between the arrow shaft and the point itself. Its surface is equipped with special grooves that are not merely aesthetic. Their primary purpose is to ensure an even distribution of glue around the entire circumference of the insert when it is bonded into the shaft. This eliminates the risk of air pockets and guarantees maximum bond strength even during high-velocity impacts into tough targets.
| Parameter | Value |
|---|---|
| Material | High-quality Aluminium |
| Compatibility | Arrow shafts No. 13136 |
| Thread Type | Standard internal thread for screw-in points |
| Weight | Optimised for flight stability (approx. 1-2 grams) |
How to Properly Install the Insert
For the best results, we recommend the following procedure:
- Carefully clean and degrease the inside of the arrow shaft (e.g., using isopropyl alcohol).
- Clean the surface of the insert as well.
- Apply a small amount of archery-grade glue or specialised hot melt adhesive to the grooves of the insert.
- Push the insert into the shaft, rotating it slightly as you insert it to spread the glue evenly.
- Wipe off any excess glue immediately and allow the bond to cure according to the glue manufacturer's instructions.
Did you know...?
Using inserts significantly extends the lifespan of your arrows. If you damage a tip on a hidden stone in the target during practice, you don't have to discard the entire arrow. Simply unscrew the damaged point and replace it with a new one. This system is the industry standard for modern carbon and aluminium arrows used in both target archery and hunting.
Care Instructions and Warnings
The insert itself requires very little maintenance, but it is vital to keep the internal threads clean. If dirt or grit enters the threads, it can damage the screw-in point. Never attempt to force or hammer the insert into the shaft – if it doesn't slide in smoothly, check for debris inside the shaft or verify you have the correct size. Also, avoid using harsh chemicals that could compromise the aluminium structure or the integrity of the adhesive bond.
Recommended Accessories
To go with this insert, you will certainly need a set of screw-in field points for practice and potentially broadheads for specific applications. Don't forget to pick up some high-quality insert adhesive and an arrow puller, which makes handling arrows at the target much easier and protects your gear from unnecessary stress.
We are here for you!
