Čeština
Deutsch
Embossed Viking Leather Belt with Brass Buckle and Chape - Outlet
Gird yourself with the strength and style of the Norse warriors! This robust Viking belt is crafted from genuine, heavy-duty cowhide over 3.5 mm thick, ensuring it will withstand even the most arduous expedition. Its surface is adorned with a subtle embossed pattern, and the main features are a brass buckle and chape with detailed knotwork motifs in an authentic Viking style. This belt is not just an accessory, but a real piece of equipment that will enhance the authenticity of your costume. Its greatest advantage is that it is supplied without pre-punched holes, allowing you to customise it perfectly to your measurements and layers of clothing. Become the master of your fate and your belt! Further product information ...
The following variants are currently available:
Embossed Viking Leather Belt with Brass Buckle and Chape
Key Features of the Belt
This belt from the Lord of Battles brand is the epitome of durability and historical design.
- Extremely Tough Leather: The cowhide, approximately 3.6 mm thick, guarantees that the belt won't sag even under the weight of a sword, axe, or a full pouch.
- Authentic Decoration: A subtle embossed pattern runs the length of the belt, and the patinated brass hardware is decorated with intricate Celtic or Norse knots that hark back to 10th-century art.
- Full Control Over Sizing: The belt is supplied without holes so you can achieve a perfect, tailor-made look. No compromises, no unnecessary extra holes.
- Long Cut: The lengths of 130, 150, and 170 cm are designed for the historically correct way of wearing the belt with a long, trailing end.
Customise Your Belt for the Perfect Fit!
The absence of holes is a deliberate feature and a huge advantage. It allows you to create a belt that fits you absolutely perfectly, whether you wear it over a thin tunic or a thick gambeson.
How to Punch a Hole:
- Put on the costume you will most often wear with the belt.
- Tighten the belt around your waist and pass the end through the buckle.
- Make a mark where the buckle's pin touches the leather (e.g., with a pencil or an awl).
- Use a hole punch or a hollow punch and hammer on a sturdy surface to make a hole at the marked spot. You can also find hole-punching pliers in our shop!
How to Wear the Long End Correctly:
For an authentic Viking look, tie the loose end of the belt. After buckling, bring the end up from UNDERNEATH the belt, pass it down through the loop you've created, and pull it tight. The end will hang elegantly and stay out of your way.
Caring for Your Belt
With a little care, this belt will serve you for a lifetime.
- Keep the leather dry. If it gets wet, let it air dry naturally, never near a heat source.
- Occasionally, you can treat the leather with a beeswax-based conditioner to nourish and waterproof it.
- The brass parts may develop a patina, which is desirable. If you prefer a shine, you can carefully polish them with a cloth and brass cleaner.
Detailed Product Parameters
| Parameter | Value |
|---|---|
| Available Lengths | 130 cm, 150 cm, 170 cm |
| Leather Width | approx. 0.83 in (21.2 mm) |
| Leather Thickness | approx. 0.14 in (3.66 mm) |
| Material | Cowhide leather, brass |
| Buckle Dimensions | approx. 1.6 x 1.4 in (41 x 35 mm) |
| Chape Dimensions | approx. 1.7 x 0.7 in (43.6 x 18.2 mm) |
| Weight | approx. 143 g |
We are here for you!
