Čeština
Deutsch
Boar Spear, c. 1430
1x
This boar spear is a real hunting weapon for killing the wild boar in the hold of hunting dogs. It has sharp edges and is pointed. Handle with caution, risk of Injury! The Boar Spear is delivered disassembled (if ordered with the shaft). There are 2 holes drilled in the sides of the socket through which 2 nails are to be nailed to fix to the spear on the shaft. More information...
Boar Spear Frederick IV of the Tyrol, c. 1430
- 42cm total length (without the wooden pole)
- 26cm blade length of the spear point
- 13.2cm - width of the "wings"
- the blade of the spear is at its thickest/widest point 60mm wide and 21mm thick
- at the distance of 5cm from the tip of the spear is it 10mm thick
- 1024 g weight of the metal spear point
- 840 g weight of the wood pole
- pole from ash
- the speat point has smooth polished finish without any decorative engraving (like on the original)
- Outer diameter of the socket approx. 32-35mm
- Material thickness of the socket is approx. 2-3mm
- Diameter of the shaft (wooden pole) approx. 35mm
Delivery optionally with shaft of hard wood (made of beech or oak) Ø 32mm, octagon section, overall length 195cm.
This boar spear was made after the original from the Kunsthistorisches Museum in Vienna.
Please note: Originals of polearms often reached lengths of more than two meters (79 inches). This is more than the transport restriction allows. If you order this weapon replica with a wooden pole, it will be delivered in parts with a ca 198cm (78ichens) long wooden pole. You will have to assemble the parts yourself. All parts including rivets are included in the delivery. All needed pins to connect up the pieces including the metal strips that run down the shaft and the leather fringes are supplied.
Write to our specialist
