Wooden stand for vertical sword display

Dark wooden stand for vertical sword display

Simple construction with a dark finish

The stand comprises a square wooden base and a vertical upright topped with an open blade guide. Its dark finish retains visible wood grain and complements both historically styled and modern interiors. The overall height is approximately 72 cm / 28.35 in, with the upper guide about 70 cm / 27.56 in above the base.

The sword’s weight is transferred through the blade point onto the base. The upper guide locates the blade and limits sideways movement. It is an open support without a locking mechanism, so always check the stability of both the sword and the stand after positioning the weapon.

Compatibility with your sword

The upper guide accommodates blades no wider than 60 mm / 2.36 in. Before ordering, measure the blade approximately 70 cm / 27.56 in from the point, where it will pass through the upper guide. The blade must reach this height, and its shape must allow it to fit correctly.

The stand is best suited to straight historical replicas and fantasy swords that meet these conditions. It is unsuitable for strongly curved sabres or excessively wide blades. The crossguard and hilt must not obstruct the upper guide or cause the stand to tip.

Technical specifications

Positioning and correct use

Before use, check that the base, upright and upper guide are securely connected. Place the stand on a level, firm surface away from walkways and furniture edges. Keep it away from fireplaces, radiators and other heat sources.

Hold the sword with both hands, carefully guide the blade into the open upper support and slowly rest its point on the base. Do not let the point drop onto the wood. Before letting go, check that the sword stands upright without tipping the base. No load capacity is stated in the supplied information.

The sword as a collectable

This is a modern display accessory without a documented connection to a specific historical original. Swords could also symbolise social standing and family tradition. In historicist interiors of the 19th century, old weapons and replicas were used as decorations recalling the age of chivalry. A simple stand lets you present your own collectable in a similar spirit.

Care and safety

• Remove dust with a soft, dry cloth and wipe away moisture immediately.
• Do not soak the wood; protect it from direct sunlight, high humidity and heat sources.
• Do not use abrasive cleaners or solvents.
• Regularly inspect the connections, upper guide and area supporting the point.
• A thin leather or felt pad can reduce marks in the base; check the sword’s seating again after adding it.
• Move the stand without a weapon fitted and support it by the base.
• A sharp point can damage the wood. Display the sword in its scabbard only if it fits the guide and remains stable.
• A falling sword or contact with its cutting edge can cause serious injury. Keep the stand and weapon out of reach of children and pets.

Recommended accessories

We recommend a soft duster, a thin protective pad beneath the point and a suitable conservation product for the blade. You can complement a European sword display inspired by the 14th–16th centuries with a corresponding replica scabbard, sword suspension system or decorative shield on a separate support.