Arrow Rests

Are you also pursuing the archery? Would you like to be as good shooter as legendary Robin Hood or William Tell? So you have to possess the best archery equipment! Arrow rest is used to precise vertical guidance of arrow. It is a simple tool that supports the arrow. Take a look at various arrow rests which are offered in our e-shop.

Arrow Rest RC 101

Arrow Rest RC 101

Detail 16,00 € 3 Weeks

Arrow Rest PSE HORNET

Arrow Rest PSE HORNET

Detail 26,00 € 3 Weeks

Arrow Rest SUPER FLYTE

Arrow Rest SUPER FLYTE

Detail 27,00 € 3 Weeks

Počet produktů na stránku: 1 - 9 z 10
Na začátek Předchozí 1 | 2 Na konec

Arrow rest is used to precise vertical guidance of arrow. It is a simple tool that supports the arrow. The arrow rest is a small ledge or extension above the grip which the arrow rests upon while being aimed. Only the thumb or index finger was used in the past. This solution was imprecise and painful. Later various pins or pieces of leather were also used. Fortunately, special arrow rests (plastic or metal, in various shapes and designs) are already used today.

Each type of bow needs a different type of arrow rest.

An arrow rest, sight, stabilizer, peep sight, nocking loop, release aid, arm guard, finger tab and quiver should be part of every bow. Possession of a bowcase is suitable. The case will protect the bow from heat and moisture. And every archer should have lots of arrows and a target and target face.

Advisory Service: Questions and Answers

How and what materials are your daggers made from?

The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.

Enter the Advisory Service