|In your basket: 0 pcs in total 0 €|
Robla cold degreaser removes oil, grease and even dried, resinified oil residues from all kinds of metals and plastic materials. It is ideal for the pretreatment of metallic surfaces prior to browning or galvanising. Or it can simply be used to get rid of undesirable fat and glue residues. Robla grease remover is ecologically neutral. Its components will biodegrade naturally through photo-oxidation.
A very effective fat solvent.
Robla cold degreaser should be sprayed from a distance of 15 to 25 cm and wiped off after a short exposure time. You may have to repeat the procedure several times, depending on the degree of oiliness of the surface to be degreased. When dry, it is free of grease and ready for further handling.
The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.