|In your basket: 0 pcs in total 0 €|
This water flask is made from genuine buffalo leather. Please note that the leather used, is a natural material, where small marks and imperfections on the surface may occur. The coarseness and exact colour tone may vary from piece to piece as a consequence of the traditional dying.
This water flask III was crafted in traditional way. It may become leaky after some time. If this happens, please do the following steps: warm the water bottle and pour a bit of melted bee wax inside. Tilt and turn it over in all directions to ensure that the wax is inside equally distributed and then let the wax cool down and solidify.
Made by Marshal Historical.
Important note: This is a fully functional prop of historical designed water flask, which is produced in small quantities in traditional manner. A regulatory food safety certification would make the price unaffordable. For that reason, we are committed to the following legal notice: This is a decoration item, neither certified nor suitable for contact with food!
The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.