Langsax | long seax Eldgrim

Langsax (long seax) - Blades are 50cm or longer, often withmultiple fullers and grooves, patternwelded blades, and long hiltssimilar to broad seaxes. The edge is generally straight, or curvedslightly towards the tip. The back either curves gently, or with asharp angle towards the tip, which is located below the centerline ofthe blade.  

Price incl. 21% VAT: 87
Handle wrapping:
Edge:
Blade tip:
Overall length approx.:
Delivery:

Availability: In stock 1pcs!

Price of the selection: 87
Add to basket:
pcs
  • Product No: 4709

Variants in stock

natural leather color (not dyed) | blunted (approx. 3 mm) | blunt - rounded | 40 cm | without scabbard
pcs (1 pcs In stock)

Langsax | long seax Eldgrim

Please choose the requested overall length of the Langsax | Long seax above.

Parameter

  • Blade length approx. 46,5 | 38 | 29 cm
  • Overall length approx. 62 | 51 | 42 cm
  • Guard width approx. 5,6 cm
  • Full-tang blade made of tempered and hardened spring steel DIN 1.7103 (6%C; 0,5-0,85Mn; 1,3-1,6%Si; 0,8-1,05Cr)
  • Blade of spring steel W.Nr. 1.7102 (DIN 54SiCr6) quenched to a hardness of approx. 48 HRC

Made in the Czech Republic.

Please read also our: Directions for the use of bladed weapons.

Product review

Number of product reviews: 0 Rewieved so far: 0 customers.

Write your own review






You can add your assessment.:

Tip: To refer to a specific comment, please type its number in square brackets.
Example: [1] A reference to comment No. 1 will be published.




No comments

Add a new comment





Tip: To refer to a specific comment, please type its number in square brackets.
Example: [1] A reference to comment No. 1 will be published.

Your question to the Langsax | long seax Eldgrim

Do you have a question about a product or the buying process here? Please provide your contact information so that we may send you our answer.





We are strongly committed to protecting the privacy of our customers. Any information you provide will be held securely and in accordance with the Data Protection Act 101/2000. Your personal details will not be disclosed to third parties.

Recommended accessories

Scramaseax Sheath

Scramaseax Sheath

Detail 113,00 € 6 Weeks

Similar products

Scramasax Molle

Scramasax Molle

Detail 197,00 € 10 Weeks

Anglo-Saxon Scramaseax Orvin

Anglo-Saxon Scramaseax Orvin

Detail 176,00 € In stock

Advisory Service: Questions and Answers

How and what materials are your daggers made from?

The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.

Enter the Advisory Service