|In your basket: 0 pcs in total 0 €|
A double scabbard for keen warriors is made of up to 3.5 mm thick cowhide. The product is composed of two scabbards that are attached to carrying straps via a hanger. The scabbards are worn on the back. The carrying straps are 4 cm wide. At the bottom part they thread through a belt that is worn around waist. The metal parts for this hanger are made of iron and hand-hammered into the required shape. Every scabbard is made of a single piece of leather and sewn together in the central part with a leather strip.
The belt's width is 4 cm. The belt's maximum length is 150 cm. If you pay a certain additional fee we will produce for you a longer belt to order. Besides the colour shown in the picture the scabbard is available in other colours: see the choice of colour.
Advice for wearers of weapons: Bear in mind the weight and length of your weapons. We recommend shorter swords that are easier to unsheathe.
These sword scabbard made on measurement chart
Please note: This product is made by hand from genuine leather. This is a purely natural material. Minor differences in the colour and surface texture are its natural characteristics. These small imperfections do not decrease the value of the product. Each piece is to some extent an original.
The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.