|In your basket: 0 pcs in total 0 €|
The delivery of this sallet armor includes neither gauntlets nor helmet. However, you can order these parts with the armor. We recommend e.g. these sallet gauntlets and this sallet. You can find more models of helmets in the category sallets.
This Sallet armor will be made to measure to your exact size. To submit us your measurements, please use the following measurement chart.
This armour is made of the following material: Steel plate according to the standard CSN EN 10 204 (DIN 50 049); steel mark DC 01 Am; chemical melting analysis: C 0,04%, Mn 0,34%, Si 0,01%, S 0,008%, yield point 182 Mpa, tensile strenght 310Mpa, tensibility A80 43%
It is just hand-hammered, not tempered. But the steel is hard enough, to suit its purpose.
The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.