Gothic broadsword Nedor

Price incl. 21% VAT: 149
Handle wrapping:
Blade tip:

Available in approx. 8 Weeks after Order

Price of the selection: 149
Add to basket:
  • Product No: 2151

Gothic broadsword Nedor

Specifications of the gothic sword Nedor:

  • Overall length approx. 90 cm
  • Blade length approx. 72 cm
  • Guard width approx. 19 cm
  • Blade of spring steel W.Nr. 1.7102 (DIN 54SiCr6) quenched to a hardness of approx. 48 HRC

Made in the Czech Republic.

Specifications vary from piece to piece; all stated data are to be understood as approximate. The blade is made out of hardened and tempered high carbon spring steel that is not stainless. The guard and pommel is made of steel.

The practical | battle-ready version of this sword has a blunt edge ( 2-3 mm ) and rounded point. Such sword was designed to be drawn in a battle or in a stage combat show.

Please note we cannot accept any responsibility for injury, damage or loss incurred by use of any of our sword. You use the sword entirely at your own risk! Even an unsharpened sword can cause serious injury and if precaution is not used easily break bone. Swords are not toys! Improper use and handling of accord may result in serious injuries or death to yourself or bystanders. Please keep your sword out of reach of children!

In fighting with sword on sword, the opponent’s blade should be parried with the side of the blade. Lead your sword sporty right and without excessive and/or unnecessary strength.

Compliance to local, state and federal laws and/or statutes is the responsibility of the purchaser.

Despite the high conscientiousness in the production and material selection, we cannot provide any warranty for breakage of the blade even at proper use. Any sword blade can be broken under certain circumstances. An absolute warranty cannot be provided by any respectable maker.

We warranty our swords against all manufacturer's defects (workmanship and or materials) for a period of two years. This warranty applies only when the product is used under normal conditions for which the sword is designed, and does not apply to damage related to accident, misuse, improper care, negligence, and abnormal and/or excessive wear and tear.

Possible nicks in the blade edge are natural symptom of wear and tear and cannot be reclaimed. When they turn up, please remove all sharp nicks by use of diamond file, abrasive paper or grinding machine.

Loosening of a cross | guard cannot be in many cases avoided as well. It can be fixed by additional riveting or tightening the screw joint. Winding a fishing line around the blade tang into the gap between the grip and guard prove as helpful as well to many swordmen, when trying to fasten a loosened guard.

Please read also our: Directions for the use of bladed weapons.

Product review

Number of product reviews: 0 Rewieved so far: 0 customers.

Write your own review

You can add your assessment.:

Tip: To refer to a specific comment, please type its number in square brackets.
Example: [1] A reference to comment No. 1 will be published.

No comments

Add a new comment

Tip: To refer to a specific comment, please type its number in square brackets.
Example: [1] A reference to comment No. 1 will be published.

Your question to the Gothic broadsword Nedor

Do you have a question about a product or the buying process here? Please provide your contact information so that we may send you our answer.

We are strongly committed to protecting the privacy of our customers. Any information you provide will be held securely and in accordance with the Data Protection Act 101/2000. Your personal details will not be disclosed to third parties.

Recommended accessories

Similar products

Advisory Service: Questions and Answers

How and what materials are your daggers made from?

The daggers are approximately made as follows. The basic shape of the blade is made by a laser CNC machine. It is burned from spring steel. The semi-finished blade follows then in the groove cutter, where the cutting edge and the groove are milled. The blade is then oil-quenched and tempered to the desired hardness. Then the guard and pommel is attached to the blade tang. The tang is usually peened at the end (behind the pommel) and the cross-guard hard soldered with brass. Hardwood plates are placed under the handle wrapping from genuine cowhide so that the handle is sufficiently robust for a safe grasp. The steels surfaces obtain the desired finish in the end - with a wire brush or with a felt disc with polishing paste.

Enter the Advisory Service