Lansquenet single-hand sword

Specifications vary from piece to piece; all stated data are to be understood as approximate. The blade is made out of hardened and tempered high carbon spring steel that is not stainless. The guard and pommel is made of steel.

Price incl. 21% VAT: 183
Handle wrapping:
Blade tip:

Available in approx. 8 Weeks after Order

Price of the selection: 183
Add to basket:
  • Product No: 2139

Lansquenet single-hand sword

Specifications of the lansquenet single-hand sword:

  • Overall length approx. 70 cm
  • Blade length approx. 55 cm
  • Guard width approx. 10 cm
  • Blade of spring steel W.Nr. 1.7102 (DIN 54SiCr6) quenched to a hardness of approx. 48 HRC

Made in the Czech Republic.

The practical | battle-ready version of this landsquenet sword has a blunt edge ( 2-3 mm ) and rounded point. Such landsquenet sword was designed to be drawn in a battle or in a stage combat show.

Please note we cannot accept any responsibility for injury, damage or loss incurred by use of any of our landsquenet sword. You use the landsquenet sword entirely at your own risk! Even an unsharpened landsquenet sword can cause serious injury and if precaution is not used easily break bone. landsquenet swords are not toys! Improper use and handling of accord may result in serious injuries or death to yourself or bystanders. Please keep your landsquenet sword out of reach of children!

In fighting with landsquenet sword on landsquenet sword, the opponent’s blade should be parried with the side of the blade. Lead your landsquenet sword sporty right and without excessive and/or unnecessary strength.

Compliance to local, state and federal laws and/or statutes is the responsibility of the purchaser.

Despite the high conscientiousness in the production and material selection, we cannot provide any warranty for breakage of the blade even at proper use. Any landsquenet sword blade can be broken under certain circumstances. An absolute warranty cannot be provided by any respectable maker.

We warranty our landsquenet swords against all manufacturer's defects (workmanship and or materials) for a period of two years. This warranty applies only when the product is used under normal conditions for which the landsquenet sword is designed, and does not apply to damage related to accident, misuse, improper care, negligence, and normal and/or excessive wear and tear.

Possible nicks in the blade edge are natural symptom of wear and tear and cannot be reclaimed. When they turn up, please remove all sharp nicks by use of diamond file, abrasive paper or grinding machine.

Loosening of a cross | guard cannot be in many cases avoided as well. It can be fixed by additional riveting or tightening the screw joint. Winding a fishing line around the blade tang into the gap between the grip and guard prove as helpful as well to many landsquenet swordmen, when trying to fasten a loosened guard.

Please read also our: Directions for the use of bladed weapons.

Product review

Number of product reviews: 0 Rewieved so far: 0 customers.

Write your own review

You can add your assessment.:

Tip: To refer to a specific comment, please type its number in square brackets.
Example: [1] A reference to comment No. 1 will be published.

No comments

Add a new comment

Tip: To refer to a specific comment, please type its number in square brackets.
Example: [1] A reference to comment No. 1 will be published.

Your question to the Lansquenet single-hand sword

Do you have a question about a product or the buying process here? Please provide your contact information so that we may send you our answer.

We are strongly committed to protecting the privacy of our customers. Any information you provide will be held securely and in accordance with the Data Protection Act 101/2000. Your personal details will not be disclosed to third parties.

Recommended accessories

Advisory Service: Questions and Answers

What is the difference between industrially rolled and hand-forged blade?

In the case of hand-forged blade our blacksmith takes the already rolled spring steel and forges it with hand on the anvil or under the monkey (drop hammer). By forging becomes the steel more compacted (denser). Industrially rolled spring steel blades are made by cutting steel plate into strips under drop shears. Then they are ground or milled/grooved and without further forging directly put into the annealing furnace and hardened in oil bath. The qualities of both kinds of blades do not differ from each other much since the industrial rolling is already very good. On forged blades usually have forge traces, which give them an authentic and unique look.

Enter the Advisory Service